Sitina 1 is an open-source camera currently in development. Here are the preliminary specifications:
Hardware
- SoC: Xilinx Zynq 7010 (2x667MHz Cortex-A9, 28K logic cells FPGA)
- RAM: 512MB 16-bit DDR3 SDRAM
- AFE: Analog Devices AD9990
- Sensor: Kodak/ONsemi KAI-11000/KAI-11002M/CM
- Screen: 3.4″ 480×480 High-Brightness DPI IPS LCD
- External Ports:
- SD slot (HS, 25MB/s)
- USB Type-C (5V3A power supply)
- Flash sync terminal
Camera Features
The following are possible with the hardware but not necessarily supported by the current software.
- Sensor Type: 35mm Interline CCD sensor
- Sensor Size: 36.0 x 24.0 mm
- Effective Pixels: 10.7MP
- Lens Mount: Active E mount
- Still Resolutions:
- 4008×2672 10.7MP 3:2
- 3563×2672 9.5MP 4:3 1.08X crop
- 2672×2672 7.1MP 1:1 1.27X crop
- 2782×1856 5.2MP 3:2 APS-C crop
- 2676×2007 5.4MP 4:3 APS-C crop
- 2365×2365 5.6MP 1:1 APS-C crop
- Still Format:
- DNG (10/12/14-bit lossless compressed RAW)
- JPEG
- Readout Speed:
- 4008×2672 up to 5FPS
- 4008×480 at 28FPS (line skipping live view, rescaled to 480×320 for output)
- Video recording is not supported
- ISO: 100 to 6400 (color version)
Status
Hardware R0.11 tested and working. The hardware still needs a lot of work and is not ready yet.
